Physical Interfaces

• 16 x RJ45 Ethernet PoE Ports (4 x PoE++ & 12 x PoE+) – 10/100/1000/2500Mbps
• 4 x SFP+ Ports – 1000Mbps/10Gbps
• Console Port (RJ45 physical, RS-232 electrical)

PoE Specification

• 16-ports 802.3af & 802.3at (High Power) PoE PSE
• 4 dedicated 802.3bt PoE++ (90W) Ethernet ports
• Up to 30 watts per port for remaining Ethernet interfaces
• 400 Watts Total Power Budget for PoE
• Auto Detection of Powered Device (PD) and Consumption Levels
• Per Port PoE Status LED Indicators
• Alert LED for high PoE Usage
• Port Power Consumption Monitoring via Web Interface & CLI
• Circuit Protection to Prevent Power Interference between Ports
• PoE PD Monitoring & Maintenance Features (per port)
  • Scheduling
  • PoE PD Priority
  • Restart PoE PD if not responding to ping
  • Restart PoE IP Camera if not providing camera output

VLAN

• 802.1q Tag-based VLAN
• Port-based and MAC-based VLANs
• QinQ (Basic)
• GVRP – General VLAN Registration Protocol
• Up to 256 VLANs (out of 4096 VLAN IDs)
• 802.1v Protocol-Based VLAN
• Voice VLAN (OUI Mode)
• Surveillance VLAN (OUI Mode)
• Management VLAN
• Port Isolation

QoS

• Support 8 priority queues
• Port-Based rate control (Ingress & Egress)
• Priority queue schedule (WRR or Strict Priority)
• Rate Limit
• Class of Service
  • 802.1p CoS
  • DSCP
  • CoS-DSCP
  • IP Precedence ToS

Network Security

• IP Source Guard with ARP inspection
• Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
• DoS Attack protection
• AAA Authentication
• MAC Authentication
• Protected Port / Port Isolation
• Static Port Security
• Dynamic ARP Inspection
• DHCP Snooping with Option 82
• Loop Detection & Prevention
• Access Control Lists (ACL)
  • Up to 512 ACL Entries
  • Source and destination MAC
  • VLAN ID
  • IPv4/v6 address
  • Protocol
  • TCP/UDP port

Spanning Tree

• Spanning Tree Protocol (STP)
• Rapid Spanning Tree Protocol (RSTP)
• Multiple Spanning Tree Protocol (MSTP)

Link Aggregation

• Combine multiple ports to increase bandwidth
• 8 Aggregation Groups
• Up to 8 ports in each group
• LACP or Static setup
• Supports traffic load balancing

Networking Performance

• Switching Capacity: 160 Gbps
• Forwarding Rate: 119.04 Mpps at 64 bytes
• MAC Addresses Supported: 16,000
• Jumbo Frames up to 12KB
• Packet Buffer size: 12Mbit
• Layer 3 Routing Table: Up to 6000 Entries

Multicast

• Up to 256 multicast groups
• Multicast Group Filtering / Throttling
• IGMP Snooping V2/V3 (BISS)
• IGMP V2/V3 Querier
• Multicast VLAN registration
• MLD Snooping V1/V2
  • Immediate Leave
  • Report Suppression
  • IGMP/MLD Querier

AAA

• RADIUS / TACACS+ Authentication for Management
• Multiple AAA Server
• MAC / Inaccessible Authentication bypass
• RADIUS Authentication 802.1X
  • Accounting
  • Guest VLAN
  • Port based Authorisation
    • 802.1X Single/Multi
    • MAC-based
    • Web-based
  • Attribute Assignment
    • User Privilege
    • VLAN
• TACACS+ Authentication
  • Port Authorisation
  • Accounting

ONVIF Surveillance Management

• Discovery of ONVIF-compliant IP Cameras
• Surveillance Topology
• Real-Time Video Streaming
• ONVIF Device Maintenance
  • Device Information
  • Network Settings Configuration
  • Time Settings
  • Reboot
  • Reset to Factory Default Settings
  • Ping Check with Mail Alert on disconnection

Management

• Central Management
  • VigorACS
  • VigorConnect
  • Vigor Router Switch Management (requires router firmware support)
• Running/Startup/Backup Configuration
• sFlow
• IPv4 & IPv6 Dual-Stack
• LLDP(802.1ab) + MED
• Web User Interface (HTTP or HTTPS)
• Firmware Upgrade/Backup by HTTP/HTTPS
• HTTP (Non-TLS) can be disabled for increased security
• Configuration Backup/Restore
• Factory Default
• System Reboot
• Dual Firmware Image (Active & Backup Firmware)
• Command Line Interface (CLI) via SSH/Telnet
• Console Port (RJ45) for CLI management
• OpenVPN Client with Certificate-based auth
• SNMP v1, v2c, v3 (with Generic Traps)
• RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
• SNTP (Simple Network Time Protocol)

Diagnostics

• Port Status & Usage display
• CPU/RAM Usage display
• MAC Address Table
• Device Check
• Syslog
• Mail Alert
  • Port Status
  • Port Speed Change
  • System Restart
  • Device Check
  • IP Conflict
  • ONVIF IP Camera Snapshot
• Port Mirroring
• Ping Diagnostics
• Port-based Cable Test
• Fan Test

Hardware Monitor

• Remote Monitoring through Web Interface & VigorACS
• Hardware Monitor Data Recording & Graphing

Layer 3 Networking Features

• Static Route
• VLAN Routing
• Virtual Router Redundancy (VRRP) Protocol

IPv4 Features

• DHCP Client
• DNS Client
• DHCP Server
  • Up to 8 subnets
  • Option 82, 66, 67
  • DHCP Relay
  • DHCP Snooping
  • DHCP IP Source Guard

IPv6 Features

• Auto Configuration
• Static IPv6 Address & Prefix Length
• Static IPv6 Default Gateway
• IPv6 Neighbour Discovery (ND)
• IPv6 Duplicate Address Detection
• ICMPv6
• DHCPv6 Client

General IEEE Standards Compliance

• 802.3af PoE
• 802.3at PoE+
• 802.3bt PoE++
• 802.3 10Base-T
• 802.3u 100Base-T
• 802.3ab 1000Base-T
• 802.3ae 10GBase-T
• 802.3x Flow Control Capability
• 802.3 Auto-negotiation
• 802.3ad Port trunk with LACP
• 802.3az Energy Efficient Ethernet
• 802.1q VLAN
• 802.1p Class of Service
• 802.1d Spanning Tree
• 802.1w Rapid Spanning Tree
• 802.1s Multiple Spanning Tree
• 802.1x Port Based Network Access Control
• 802.1ab Link Layer Discovery Protocol (LLDP)
• 802.1ad QinQ

Operating Requirements

• Power Input Requirements: 100-240VAC
• Power supply: Internal
• Maximum Input Power Consumption: 550 Watts
• Cooling: Fan
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -20°C to 70°C
• Operating Humidity: 10% to 90% (non-condensing)

Physical Specifications

• Dimensions (W x D x H): 440 x 281 x 44 mm
• Rack mountable: 1U
• Weight: 4.3 kg (excluding SFP modules/cables)
• Brackets included for rack or wall mounting

Compliances

• UKCA
• ROHS
• CE