TELTONIKA RUTX11 Industrial 4G LTE CAT 6 Dual SIM GNSS Cellular Wireless Router

Write a review below |
Rated 5 out of 5

In stock

SKU: RUTX11000300

Condition: New

Delivery: Free Next Day*

Call For Price

In stock

TELTONIKA RUTX11 Industrial 4G LTE CAT 6 Dual SIM GNSS Cellular Wireless Router

Write a review below |
Rated 5 out of 5

In stock

SKU: RUTX11000300

Condition: New

Call For Price

(QTY Discount Available)*

Order before 12:00 PM for same day dispatch.

Easy Returns

DISCOUNTED QUOTE

In stock

    TELTONIKA RUTX11 Industrial 4G LTE CAT 6 Dual SIM GNSS Cellular Wireless Router

    Specification

    Mobile
    Mobile module 4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMA
    SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received
    Bridge Planned for future Firmware Direct connection (bridge) between mobile ISP and device on LAN
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    Black/White list Operator black/white list
    Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services
    Band Management Band lock, Used band status display
    WIRELESS
    Wireless mode 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
    WiFi security WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
    ESSID ESSID stealth mode
    ETHERNET
    WAN 1 x WAN port (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    LAN 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    BLUETOOTH
    Bluetooth LE Bluetooth low energy (LE) for short range communication
    NETWORK
    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
    Network protocols CP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMNP, MQTT
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Firewall Port forward, traffic rules, custom rules
    QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    Network backup VRRP, Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
    Load balancing Balance your internet traffic over multiple WAN connections
    SECURITY
    Authetication Pre-shared key, digital certificates, X.509 certificates
    Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Atack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN Port based and tag based VLAN separation
    Mobile quota control
    WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
    Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
    VPN
    OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
    OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
    IPsec IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
    GRE GRE tunnel
    PPTP, L2TP Client/Server services can run simultaneously
    MONITORING & MANAGEMENT
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    FOTA Firmware update from server, automatic notification
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
    SNMP SNMP (v1, v2, v3), SNMP trap
    RMS Teltonika Remote Management System (RMS)
    SYSTEM CHARACTERISTICS
    CPU Quad-core ARM Cortex A7, 717 MHz
    RAM 256 MB, DDR3
    FLASH memory 256 MB SPI Flash
    LOCATION TRACKING
    GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
    Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
    Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS
    Geofencing Configurable multiple geofence zones
    POWER
    Connector 4 pin industrial DC power socket
    Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
    PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
    Power consumption 11 W Max
    PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
    Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
    I/Os 1 Digital Input, 1 Digital Output on 4 pin power connector
    Status LEDs 3 x connection status LEDs, 5 x connection strength LEDs, 8 x LAN status LEDs, 3 x WAN status LEDs, 1 x Power LED
    SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
    Power 4 pin industrial DC power socket
    Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
    USB USB A port for external devices
    Reset Reset/restore to default button
    PHYSICAL SPECIFICATION
    Casing material Full aluminium housing
    Dimensions 115 mm x 95 mm x 44 mm (H x W x D)
    Weight 456 g
    Mounting options DIN rail (can be mounted on two sides), flat surface placement
    OPERATING ENVIRONMENT
    Operating temperature -40 C to 75 C
    Operating humidity 10% to 90% non-condensing
    Ingress Protection Rating IP30
    REGULATORY & TYPE APPROVALS
    Regulatory CE/RED, EAC, RoHS, WEEE

    Reviews

    There are no reviews yet.

    Be the first to review “TELTONIKA RUTX11 Industrial 4G LTE CAT 6 Dual SIM GNSS Cellular Wireless Router”

    Your email address will not be published. Required fields are marked *

    You have to be logged in to be able to add photos to your review.

    *BRANDS WE REPRESENT

    [wonderplugin_carousel id="1"]