Teltonika RUT955 Dual-Sim 3G 4G LTE Router

Write a review below |
Rated 5 out of 5

In stock

SKU: RUT955003530

Condition: New

Delivery: Free Next Day*

Call For Price

In stock

Teltonika RUT955 Dual-Sim 3G 4G LTE Router

Write a review below |
Rated 5 out of 5

In stock

SKU: RUT955003530

Condition: New

Call For Price

(QTY Discount Available)*

Order before 12:00 PM for same day dispatch.

Easy Returns

DISCOUNTED QUOTE

In stock

    Teltonika RUT955 Dual-Sim 3G 4G LTE Router

    Specification

    MOBILE
    Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps.
    SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received
    Bridge Direct connection (bridge) between mobile ISP and device on LAN
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    Black/White list Operator black/white list
    Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services
    WIRELESS
    Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
    WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
    WiFi security WPA2-Enterprise – PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
    SSID SSID stealth mode and access control based on MAC address
    WiFi users up to 100 simultaneous connections
    Hotspot Captive portal (Hotspot), internal/external Radius server , built in customizable landing page
    ETHERNET
    WAN 1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
    LAN 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
    NETWORK
    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT
    VoIP passthrough support H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forward, traffic rules, custom rules
    DHCP Static and dynamic IP alocation
    QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup
    Load balancing Balance your internet traffic over multiple WAN connections
    NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
    SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
    SECURITY
    Authetication Pre-shared key, digital certificates, X.509 certificates
    Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Atack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    WiFi security WPA2-Enterprise – PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
    VLAN Port based and tag based VLAN separation
    Mobile quota control Set up custom data limits for both SIM cards
    WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
    Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
    MONITORING & MANAGEMENT
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
    FOTA Firmware update from server, automatic notification.
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
    MQTT MQTT Broker, MQTT publisher
    SNMP SNMP (v1, v2, v3), SNMP trap
    JSON-RPC Management API over HTTP/HTTPS
    MODBUS MODBUS TCP status/control
    RMS Teltonika Remote Management System (RMS)
    SYSTEM CHARACTERISTICS
    CPU Atheros Wasp, MIPS 74Kc, 550MHz
    RAM 128MB, DDR2
    FLASH memory 16MB SPI Flash
    LOCATION TRACKING
    GNSS GPS, GLONASS
    Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA NMEA 0183
    NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
    Server software supported server software TAVL, RMS
    Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS
    INPUT/OUTPUT
    Input 3 x Input (0 – 3 V digital input / 0 – 30 V digital galvanically isolated input / 0 – 24 V analog input)
    Output 2 x Output (30 V, 250 mA digital open collector output / 40 V, 4 A SPST relay output)
    Events SMS, EMAIL, RMS
    POWER
    Connector 2 pin industrial DC power socket
    Input voltage range 9 – 30 VDC (2 pin industrial socket, 5mm pin pitch), reverse polarity protection, voltage surge/transient protection
    PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
    Power consumption < 2W idle, < 7W Max.
    PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
    Ethernet 4 x RJ45 ports, 10/100 Mbps
    Status LEDs 1 x bi-color connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED
    SIM 2 x SIM slots (Mini SIM – 2FF, 2st form factor), 1.8V/3V
    Power 2 pin industrial DC power socket
    Input/output 10 pin industrial socket for inputs/outputs:
    Anntenas 2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antenna connectors
    USB USB 2.0 A socket for external devices
    SD card Micro SD card slot up to 32Gb
    RS232 DB9 socket for full-featured RS232
    RS485 6 pin industrial socket for 2/4 wire RS485
    Reset Reset/restore to default button
    PHYSICAL SPECIFICATION
    Casing material Aluminium housing, plastic panels
    Dimensions 80 mm x 106 mm x 46 mm (H x W x D)
    Weight 280 g
    Mounting options DIN rail (can be mounted on two sides), flat surface placement
    OPERATING ENVIRONMENT
    Operating temperature -40 °C to 75 °C
    Operating humidity 10% to 90% non-condensing
    Ingress Protection Rating IP30
    MTBF 230000 h
    REGULATORY & TYPE APPROVALS
    Regulatory CE/RED, FCC, R&TTE, EAC, PTCRB (in progress) RoHS, WEEE
    Vehicle ECE approval mark, e-mark (E26) Regulation No. 10 R, Amendment 05, Supplement 01, SAE J1455 Revised AUG94

    Reviews

    There are no reviews yet.

    Be the first to review “Teltonika RUT955 Dual-Sim 3G 4G LTE Router”

    Your email address will not be published. Required fields are marked *

    You have to be logged in to be able to add photos to your review.

    *BRANDS WE REPRESENT

    [wonderplugin_carousel id="1"]